Internal Tuson TPMS with (6) Sensor Cradle Steel Band Kit for 18-24" Rims (TPMS6W-ST18)
Regular price
$500.00
Why do you need a TPMS system for your trailer tires? Maintaining properly inflated tires has been proven to:
- Increase Fuel Economy
- Extend Tire Life
- Improves towing safety by giving the trailer better steering, stopping and traction
- Increases Environmental Efficiency
Help prevent tire blow-outs by constantly monitoring tire pressure and temperature wirelessly with Tuson Towable Tire Pressure Monitoring System.
The Tuson Towable Tire Pressure Monitoring System (TPMS6W-STBAND18) instantly detects trailer tire pressure and temperature of 3-vehicle memories for up to ten (10) tires per vehicle memory. The wireless tire pressure and temperature sensors mount inside your trailer tires using the Tuson TPMS Sensor Steel Bands (TPMS-STBAND18) and transmit signals in RF mode to a monitoring module inside your tow vehicle that displays individual tire pressure and temperature. The Towable TPMS allows drivers to monitor the current status of all their trailer tires, increasing towing safety by allowing the driver to monitor all tires while towing.
This model contains Tuson TPMS Sensor Steel Bands (TPMS-STBAND18). If your vehicle has dually wheels, you will need to purchase the TPMS-STBAND12 or TPMS STBAND18. The TPMS-IVS/A included in the Tuson Towable Tire Pressure Monitoring Systems will NOT be compatible with dually wheels
Internal Sensor
The internal sensor monitors tire pressure and temperature in real-time and wirelessly transmits data to the receiver. The sensor is attached to the valve stem inside the tire to prevent damage or theft. Internal sensors provide the most accurate and reliable pressure and temperature readings and are more environmentally-friendly with longer-lasting battery life than external sensors.
Steel Bands (STBAND18)
The Tuson TPMS Sensor Steel Band Kit (TPMS-STBAND18) is to be used for wheels with rim diameters from 18" - 24". The TPMS-STBAND18 is designed for Tuson TPMS sensors to be mounted into a cradle bracket and attached to the wheel rim using a steel band. The TPMS-STBAND18 is an important component for appropriately mounting Tuson TPMS sensors when the wheel's valve stem diameter is not compatible with Tuson's Interchangeable Valve Stem (TPMS-IVS). The cradle is durably constructed of stainless steel to securely attach the sensor to tire rim. ccur.
RF Repeater
The RF Repeater is motion-activated and designed to boost the signal strength from the tire sensors to the receiver (monitor) in the tow vehicle. The waterproof repeater is a plug and play device using power and ground wires to connect to the trailer battery or any constant 12/24V power source for easy installation. When powered to the trailer battery, the repeater transmits trailer battery voltage to the receiver.
Receiver
The receiver (monitor) allows the driver to monitor the tire pressure and temperature of up to 10-wheels for up to 3-vehicle memory selection. The receiver will also monitor trailer and vehicle battery voltage. The receiver has two modes: driving and setting mode. Driving mode cycles between pressure, temperature, and trailer battery for the selected vehicle memory. Setting mode allows drivers to fully customize their trailer tire monitoring system.
Continuously Monitors Critical Tire Monitoring Parameters
- Tire Pressure
- Tire Temperature
- Sensors' Battery Voltage
- Repeater's Input Voltage
Visual and Audible Alarms
When the TPMS sensor detects any abnormalities, the sensor immediately transmits visual and audible alarm warnings to the receiver. Never miss a beep!
Easy Installation & Pairing
Each Tuson Towable TPMS kit comes with designated wheel orientation marks on the surface of each sensor. When each sensor is installed according to the corresponding wheels, no initial pairing is required. Our design makes installation and pairing easy.
Long-term Cost Savings
Using the Tuson Towable TPMS not only saves you money through increased fuel economy, extended tire life, but the internal sensor has up to 5x the life expectancy of an external cap sensor. Tuson's internal sensors use the same integrated sensor design used in the OEM automotive industry and can last up to 10 years, depending on the frequency of use.
Adjustable & Customizable Settings
Customize your trailer tire monitoring settings just the way you like it right at your fingertips. The Tuson Towable TPMS receiver allows you to select the pressure (kPa, psi, Bar) and temperature (°C, °F) units and set your desired temperature and pressure value to suit your needs.
Interchangeable Wheel Order
No need to remove the TPMS sensor from each tire during a tire rotation. The TPMS receiver allows you to easily change the locations of the sensors according to the tire rotation arrangement.
Receiver Specification
| Item | Specification |
| Operating Voltage | 12~24V DC |
| Operating Current | 120mA |
| Operating Frequency | 433MHz |
| Operating Temperature | -4°F~185°F (-20°C~85°C) |
| Storage Temperature | -40°F~185°F (-40°C~85°C) |
| Monitored Pressure Range | 0~203±1.5 psi (0~1400±10 kPa*) |
| Monitored Temperature Range | -40°F~257°F±5.4°F (-40°C~125°C±3°C) |
| Size | 4.5”x2.1”x1” (116.5x53x25 mm) |
| Weight | 3.4 Oz (95g) |
* Note: For kPa as pressure unit, the receiver will show “HI” on the display screen if pressure value is over 999 kPa. Otherwise, receiver shows the value normally in psi, Bar unit.
Repeater Specification
| Item | Specification |
| Operating Voltage | 12~24V DC |
| Operating Current | 11.2mA |
| Operating Frequency | 433MHz |
| Operating Temperature | -4°F~185°F (-20°C~85°C) |
| Storage Temperature | -40°F~185°F (-40°C~85°C) |
| Cable Length | 90 inch (2300 mm) |
| Size | 3.5”x3.8”x0.9” (88x96x23mm) |
| Weight | 6.0oz (170g) |
